PCBA Inspection Standard: Is the GigaBlox assembled and inspected in accordance with IPC-A-610 Class 2 (or Class 3)?

BotBlox Hardware
1

Dear BotBlox Support Team,

We are currently evaluating the GigaBlox module for an upcoming project and need to verify a few details regarding your manufacturing standards and quality management certifications.

Could you please confirm the following details?

  1. PCBA Inspection Standard: Is the GigaBlox assembled and inspected in accordance with IPC-A-610 Class 2 (or Class 3)?

  2. Bare PCB Standard: Is the bare board manufactured according to IPC-A-600 Class 2 / IPC-6012 Class 2?

  3. Flammability rating : is the PCB UL 94V-0 rated and marked on the board?

Additionally, if you have a Quality Assurance declaration or compliance summary document available, we would greatly appreciate it if you could share it with us.

Thank you for your time and assistance.

Best regards,

Yoan Piché, HW Designer

2

Hey, thanks for reaching out!

The PCB and assembly process of GigaBlox is done to IPC-A-610 Class 2.

PCB UL 94V-0 is not marked on the board, we remove markings usually due to space constraints.

For CoCs, they’re all at the link below.

Let me know if you need anything else!