Further to the post by @botblox_support above, this feature is now available for UbiSwitch in software! No soldering SM1 bridge is required! Changing the PCS mode on ports 9 and 10 can be done using the BloxOsLite CLI.
Steps:
- Ensure you have version 0.4.0 or above installed on your UbiSwitch. See here for public releases and here for documentation on updates over UART.
- Boot up UbiSwitch and then connect a 3.3V TTL UART-USB converter to open a serial console on your dev machine.
- Follow the instructions for setting PCS mode on ports 9 and 10 here
- Some examples:
port 9 mac mode 10gbaser for 10Gb SFP that does not support inband auto-negotiation with port MAC.
port 10 mac mode 1000basex for 1Gb SFP fiber.