Will UbiSwitch work with my SFP?

[josh-elijah]

After performing the steps outlined in the forum post below, we have confirmed operation with the following SFPs.

Hi Fiber ASF-GE-T1 1G Copper SFP
QSFPTEK QT-SFP-0310D | 1.25G 1310nm 10k Optical SFP

Getting UbiSwitch ports working with a 1G SFP

Ports 9 and 10 can be easily configured to work in 1G mode, instead of the 10G mode that the board ships with. Locate SM1 jumper [Screenshot 2023-09-14 at 12.40.29] Cut the track between the two pads with a scalpel. You can resolder it to re-enable 10G operation. For port 0, the process is a bit more involved, and is detailed in this forum post. Once the UbiSwitch management software is released, this will all be possible via software.