# Verification of MIL-STD-810 Test Claims for Mini Puck

**URL:** https://forum.botblox.org/t/verification-of-mil-std-810-test-claims-for-mini-puck/593
**Category:** BotBlox Hardware
**Tags:** puck-mini
**Created:** [June 19, 2026, 1:02pm UTC](https://forum.botblox.org/t/verification-of-mil-std-810-test-claims-for-mini-puck/593 "2026-06-19T13:02:41Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![ElsieMichaelson](https://avatars.discourse-cdn.com/v4/letter/e/b5ac83/32.png) [@ElsieMichaelson](https://forum.botblox.org/u/ElsieMichaelson)
#### Post date: [June 19, 2026, 1:02pm UTC](https://forum.botblox.org/t/verification-of-mil-std-810-test-claims-for-mini-puck/593/1 "2026-06-19T13:02:41Z")

</div>

_This topic was migrated from the BotBlox ticketing system after being summarized and anonymized._

Question:

We are going to be conducted DO-160 testing on a new unit which utilizes the BotBlox Puck Mini. Can you please review and advise if the attached brochure is accurate to the MIL-STD-810 tests conducted on the Puck Mini?

Answer:

The tests we conducted are:  
Low temperature: -50°C for 30 minutes - PASS (no loss of bandwidth): PASS (no damage or loss of bandwidth)

High temperature: 110°C for 30 minutes - PASS (no loss of bandwidth): PASS (no damage or loss of bandwidth)

Humidity: 95% RH, 25°C for 30 minutes - PASS (no loss of bandwidth): PASS (no damage or loss of bandwidth)

Temperature shock: -50°C to 110°C, 5 minutes dwell time, 3 sec transfer time, 3 cycles - PASS (no loss of bandwidth): PASS (no damage or loss of bandwidth)

Vibration: 15Hz with 15mm displacement to 2000Hz at 100G, 20 min per axis for 1 hour, three axes: PASS (no damage or loss of bandwidth)

Shock: 75g with 6ms duration, three axes, 5 shocks: PASS (no damage or loss of bandwidth)

You’ll find the test report on that in the link below.

> **[BOTBLOX%20PUCK%20(BB-PUK-B-1)%20MIL-STD-810%20ENVIRONMENTAL%20TEST%20RESULTS.pdf](https://store-l0hv1zrcre.mybigcommerce.com/content/BOTBLOX%20PUCK%20(BB-PUK-B-1)%20MIL-STD-810%20ENVIRONMENTAL%20TEST%20RESULTS.pdf)**

We did some additional vibration testing, specifically to test how tolerant the screws are to vibration. Results of that are in the link below.

> **[BB-PUK-B-1%20Vibration%20Results.pdf](https://store-l0hv1zrcre.mybigcommerce.com/content/BB-PUK-B-1%20Vibration%20Results.pdf)**