# How do I use UbiSwitch module with the UbiSwitch 10G Baseboard

**URL:** <https://forum.botblox.org/t/how-do-i-use-ubiswitch-module-with-the-ubiswitch-10g-baseboard/529>\
**Category:** BotBlox Hardware\
**Tags:** ubiswitch, ubiswitch-10g-board\
**Created:** [February 17, 2026, 7:30pm UTC](https://forum.botblox.org/t/how-do-i-use-ubiswitch-module-with-the-ubiswitch-10g-baseboard/529 "2026-02-17T19:30:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![botblox\_admin](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.botblox.org/botblox_admin/32/1_2.png) [@botblox\_admin](https://forum.botblox.org/u/botblox_admin)\
**Post date:** [February 17, 2026, 7:30pm UTC](https://forum.botblox.org/t/how-do-i-use-ubiswitch-module-with-the-ubiswitch-10g-baseboard/529/1 "2026-02-17T19:30:47Z")

</div>

I am trying to use UbiSwitch Baseboard 10G with the UbiSwitch module. The 10G ports link up but I can’t get any pings or network traffic through them to the other ports… help!

---

<div class="post-metadata">

**Author:** ![josh\_elijah](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.botblox.org/josh_elijah/32/568_2.png) [@josh\_elijah](https://forum.botblox.org/u/josh_elijah)\
**Post date:** [February 17, 2026, 7:32pm UTC](https://forum.botblox.org/t/how-do-i-use-ubiswitch-module-with-the-ubiswitch-10g-baseboard/529/2 "2026-02-17T19:32:32Z")

</div>

[UbiSwitch Baseboard 10G](https://botblox.io/ubiswitch-10g-baseboard/) expects to be connected to ports configured to USXGMII mode. The 10G ports on UbiSwitch are 10GBASE-R, by default.

You will need to set the mode of ports 0, 9 and 10 to USXGMII using the [BloxOSLite software](https://botblox.notion.site/PHY-and-SFP-status-control-fdb543a902374345b10c1a5254666017) running on UbiSwitch. Then it will work.

The specific commands would be.

```auto
port 0 mac mode usxgmii
port 9 mac mode usxgmii
port 10 mac mode usxgmii
conf save port

```

These commands set the port mode on UbiSwitch to what is needed for UbiSwitch 10G, and then the last command saves this configuration as non-volatile.