# Daisy chaining/series connection of multiple GigaBlox Nano

**URL:** <https://forum.botblox.org/t/daisy-chaining-series-connection-of-multiple-gigablox-nano/286>\
**Category:** BotBlox Hardware\
**Tags:** gigablox-nano\
**Created:** [August 22, 2024, 7:31am UTC](https://forum.botblox.org/t/daisy-chaining-series-connection-of-multiple-gigablox-nano/286 "2024-08-22T07:31:56Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![josh\_elijah](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.botblox.org/josh_elijah/32/568_2.png) [@josh\_elijah](https://forum.botblox.org/u/josh_elijah)\
**Post date:** [August 22, 2024, 10:48am UTC](https://forum.botblox.org/t/daisy-chaining-series-connection-of-multiple-gigablox-nano/286/2 "2024-08-22T10:48:22Z")

</div>

Yes it’s possible and people do this pretty often. A couple things to bear in mind.

1. GigaBlox (and, by extension GigaBlox Nano since it uses the same chip) have a bug related to this (see below). It’s easy to workaround, just use different numbered ports on each GigaBlox Nano.

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/botblox1/original/1X/697831eea018c2c30e9154806732c8297dacfa24.png)

1. Connecting two ports together will result in a potential bottleneck. Imagine two ports on GigaBlox A want both want to send 1Gbps to two ports on GigaBlox B. This would require an aggregate data rate of 2Gbps to be sent across the daisy chain connection, but that daisy connection is only 1Gbps. This means packet loss. This very rare though, as most ports don’t come close to operating a full line rate for any length of time. But it is something to bear mind. More on this topic can be found in the forum post below.

> [@1 to 32 outputs port embedded application](https://forum.botblox.org/t/1-to-32-outputs-port-embedded-application/269/2):
>
> We love questions like this. “Fanout” isn’t really a term that’s used a lot in ethernet networks. Generally there’s a few reasons why we don’t “fanout” ethernet. Input and output together An ethernet port consists of a transmit (tx) and receive (rx) together. In the case of 10BASE-T and 100BASE-T, one pair of wires carries tx, while the other carries rx. In the case of 1000BASE-T (and above), there are four pairs that all carry tx and rx on the said wires (using some sophisticated signal proc…

1. Connecting two GigaBlox Nano over together eats up a port on each, giving you six ports total to play with.

Let me know if that makes sense

---

_[View the full topic](https://forum.botblox.org/t/daisy-chaining-series-connection-of-multiple-gigablox-nano/286)._